Last Activity:12-16-2015 9:38 AM
Likes Given: 3
4 Likes on 4 Posts
Posted in thread: Tips for Arduno software for Rotary Table Controllers on 12-02-2015 at 06:00 PM
Just to let you know I conected it up with a 24V PSU an MSD 415 Driver and a nema 23
stepper.Its working perfectly on both the Arduino Uno and also on the Arduino Mega.I know it
will mean hand wiring ...
Posted in thread: Tips for Arduno software for Rotary Table Controllers on 12-02-2015 at 03:08 PM
Torfilli and Rod Thank you both so much for not giving up on me , I am pleased to say I now
have it working :D and also using Torfillis file I have modified it so the left keyboard button
now works gr...
Posted in thread: Tips for Arduno software for Rotary Table Controllers on 12-01-2015 at 11:31 AM
Hi Torfilli , thanks for your help ,I'm sorry to be a nuisance but I think I may be going
insane ,( thats not unusual at my age )I removed my original liquidcrystal.cpp and replaced it
with yours that...
Posted in thread: Tips for Arduno software for Rotary Table Controllers on 11-30-2015 at 12:32 PM
Hi TorfilliI too use a copy of a sainsmart LCD and my left button doesnt operate as it shouldI
had the same problem with Chuck Fellows code but easily found the line whereI could change the
ADC value ...
Posted in thread: Electronic Dividing Head using the Arduino on 11-28-2015 at 11:10 AM
Thanks both for the excellent answers It was just after asking Rod if it was direct drive that
I felt a bit silly becauseI realised that with 90 : 1 on the RT . 10 micro steps and a 200 step
Posted in thread: Electronic Dividing Head using the Arduino on 11-27-2015 at 09:52 AM
A quick question for rodwWhen you used your code with the 90:1 rotary table what gearing did
you use betweenthe stepper and the RT ? was it still 5:1 like Chuck uses or was it just a
direct 1:1 driveD...
Posted in thread: Electronic Dividing Head using the Arduino on 11-26-2015 at 11:05 AM
Thanks Chuck and RODWI had worried about the torque needed for the higher gearing and also the
holding torque needed to stop the work backing up which is why I posted to ask advice but with
Posted in thread: Electronic Dividing Head using the Arduino on 11-24-2015 at 11:41 PM
Hi ChuckI want to use your design as a simple dividing head but also use it on myrotary
table.Problem is its a 90:1 worm drive so with a 200 step motor thats far to many steps towait
for (18000).Can y...
Posted in thread: Coleman fuel, zippo lighter gas on 09-12-2013 at 08:46 AM
$10, that's cheap glow fuel (as I like to call it) around here starts at $40 a gallon and goes
up from there.:oGas is around $3.60/3.70 gallon, FAR more resonable!John.Think yourself really
lucky . ov...
Posted in thread: A viedo of my R.H. #3 under steam (Air) on 04-20-2011 at 08:27 AM
Beautiful runner, I love engines that run slowly. You describe it as R.H. #3 , but I havent a
clue what R.H stands for .Can you enlighten me and also can you tell me where I might get hold
of a copy o...