FILE ENTRIES

This is a spread sheet for Trig Values...
Posted By:
Date:
February 10, 2014 at 04:52 PM
|
Comments:
0
|
Views:
286
Brian Rupnow's build--Hit and Miss air/steam engine
Brian's build of the Hit 'n Miss engine
Posted By:
Date:
February 8, 2014 at 03:23 PM
|
Comments:
3
|
Views:
4395
Posted By:
Date:
February 4, 2014 at 09:17 AM
|
Comments:
0
|
Views:
711
You just won't get one any easier than this.
Posted By:
Date:
February 2, 2014 at 10:03 AM
|
Comments:
5
|
Views:
4622
TINY  IC engine by Putputman
A small Internal Combustion engine with...
Posted By:
Date:
January 15, 2014 at 08:32 PM
|
Comments:
10
|
Views:
6340
Elmer's #44 by Troutsqueezer
This is Trouts version of Elmer's #44. Here's the build thread: /> Here's the video: /> It's an epic film!
Posted By:
Date:
January 14, 2014 at 08:14 PM
|
Comments:
2
|
Views:
3221
I downloaded this PDF file from the web, I don't remember where.
Posted By:
Date:
January 4, 2014 at 08:22 PM
|
Comments:
2
|
Views:
2673
This is a spreadsheet with American, Metric, and the Torque by size and grade of the bolt.
Posted By:
Date:
January 3, 2014 at 03:48 PM
|
Comments:
0
|
Views:
452
If you email the company they will send you a full size wall chart, but I found this very useful.
Posted By:
Date:
January 3, 2014 at 03:28 PM
|
Comments:
0
|
Views:
556
Drawings for a .30 scale Borg Warner T-5...
Posted By:
Date:
December 27, 2013 at 11:47 AM
|
Comments:
1
|
Views:
2002
Calendar for 2013
Calendar for 2013 on tools and lathes Also south bend tools
Posted By:
Date:
December 19, 2013 at 04:40 AM
|
Comments:
1
|
Views:
1162
Autocad 3D solid model ver.2000, PDF...
Posted By:
Date:
December 3, 2013 at 06:13 PM
|
Comments:
4
|
Views:
3938
Rotary Broaching Tool
Rotary Broaching Tool - in *.dwg,*.dxf & *.pdf - revised - errors corrected.
Posted By:
Date:
December 2, 2013 at 11:33 AM
|
Comments:
5
|
Views:
4470
A .60 displacement 2 -stroke Model Airplane Engine
Posted By:
Date:
November 28, 2013 at 06:57 AM
|
Comments:
2
|
Views:
3587
Part_1.pdf
Posted By:
Date:
October 25, 2013 at 04:21 PM
|
Comments:
1
|
Views:
1884
Sketchup model of a low cost cnc...
Posted By:
Date:
October 25, 2013 at 03:50 PM
|
Comments:
1
|
Views:
2339
Source: from Abilene Christian...
Posted By:
Date:
October 25, 2013 at 03:35 PM
|
Comments:
1
|
Views:
3742
Mechanics of Steam Engine Governors
Posted By:
Date:
October 25, 2013 at 03:22 PM
|
Comments:
3
|
Views:
2686
this is an awsome book that anyone can use as a reference or as a learnerfrom basic to programing it's all in there
Posted By:
Date:
October 23, 2013 at 11:16 PM
|
Comments:
3
|
Views:
3389
This is an Arduino microprocessor...
Posted By:
Date:
October 8, 2013 at 05:55 PM
|
Comments:
6
|
Views:
4137